Hand Held Products DOLPHIN 7600, User Manual

Page: 61 / 108

Dolphin® 7600 Series User’s Guide Rev B 7 - 5
Port Menu
Tap once on a port to open the Port menu.
Status Bar
The status bar at the bottom of the main window indicates the connection status between the network card and the AP.
Depending on the status of connectivity, the status bar displays one of the following:
• Not Associated
• AP: [AP's SSID] MAC: [AP's BSSID].
Event Log Displays the event log in a custom viewer. The Event Log is a text
file that contains system information; each entry is listed
sequentially with a time/date stamp and text message.
Tap Refresh to query the system again and update the log file
while you are reading it. If the file gets too large, old entries are
automatically deleted.
Logging parameters are set on the System Tab (see page 7-14).
Menu Item Description
Enable
Disable The port should be enabled before the protocol is started.
Enabling a port is not the same as starting it (see
Start/Stop on page 7-4) ; however, both actions are
required for the Client to work.
Configure Opens the port configuration window; see Configuring Client Authentication on page 7-12.
Delete Selecting Delete has no effect; you cannot remove the radio driver from the device.
Menu Item Description
Status Bar