Hand Held Products 4X00 Software Manual Download Page 17

Page: 17 / 90

IMAGETEAM™ 4X00 Series Software Development Kit (SDK) User’s Guide

2 - 3

oemDisableSymbologyAll

This function disables all symbologies from decoding, including any unknown symbologies.

Result_t

oemDisableSymbologyAll (
void
)

Return Values

RESULT_SUCCESS

Parameters

None.

oemDisconnect

This function terminates the connection with the engine. Any resources used by the connection device driver are freed.

Result_t

oemDisconnect (
void
)

Return Values

RESULT_SUCCESS

Parameters

None.

oemEnableSymbology

This function enables specified symbologies for decoding.

Result_t

oemEnableSymbology (
BOOL *pSymbology
)

Return Values

RESULT_SUCCESS
RESULT_ERR_PARAMETER

Parameters

pSymbology

Points to an array of symbologies you want to enable. For example, if a value is set to 1 (i.e., pSymbology
[SYM_AZTEC]=1), then Aztec decoding is enabled.

Note: The array must be of size MAX_SYMBOLOGIES (Defined in Oemdecodece.h). You must initialize the entire array before

calling this function.

oemEnableSymbologyAll

This function enables all symbologies for decoding, including any unknown symbologies.

Result_t

oemEnableSymbologyAll (
void
)

Return Values

RESULT_SUCCESS

Parameters

None.

Summary of Contents for 4X00



























































































Search results

Summary of Contents for 4X00

Reviews:

Related manuals for 4X00

Brands by name

Popular brands

Hand Held Products 4X00, Software Manual

Search results

Summary of Contents for 4X00

Reviews:

Related manuals for 4X00

Brands by name

Popular brands