![background image](http://html1.mh-extra.com/html/hand-held-products/3820/3820_user-manual_3503080074.webp)
3 - 12
Multiple Symbols
When this programming selection is turned
On, it allows you to read multiple
symbols with a single pull of the scanner’s trigger. If you press and hold the
trigger, aiming the scanner at a series of symbols, it reads unique symbols once,
beeping (if turned on) for each read. The scanner attempts to find and decode
new symbols as long as the trigger is pulled. When this programming selection
is turned
Off, the scanner will only read the symbol closest to the aiming beam.
No Read
With No Read turned
On, the scanner sends an “NR” to the host if you pull and
release the trigger without reading a code (e.g., bad bar code). If No Read is
turned
Off, the “NR” will not be sent to the host.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,”
you can edit the output message using the
code for the No Read symbol is 9C.
Video Reverse
Video Reverse is used to allow the scanner to read bar codes that are inverted.
The “Off” bar code below is an example of this type of bar code.
Note: If additional menuing is required, Video Reverse must be disabled to read
the menu bar codes and then re-enabled after menuing is completed.
Multiple Symbols On
* Multiple Symbols Off
No Read On
* No Read Off
Video Reverse On
* Video Reverse Off
Summary of Contents for 3820
