HOME-ESS-LV-2.56K
Smart Energy, Sustainable Solutions
17
4.3 Installation
Make sure the ground is level and strong enough to bear the weight of products.
Before you start connecting cables, make sure that the inverter and battery are entirely switched off!
Make sure there is no water source above or near the battery, including downspouts, sprinklers, or faucets.
Step 1: Drill positioning holes on the wall
Use the bracket as a template to make positioning holes in the wall, mark the positions of the 6 holes, and
then drill 10mm holes to ensure that the depth of the holes is greater than 50mm. The bracket should be
placed at least 470mm above the ground.
Figure 9 Sample of Step 1 For Wall Installation
Step 2: Fix the wall mount bracket
Fit the expansion tubes into the holes, pull them tight, and then use the expansion screws (packaged with
expansion tube for use) to install and secure the wall mount bracket to the wall.
Figure 10 Sample of Step 2 For Wall Installation