Hanbit Electronics Co,Ltd. All rights reserved
Rev.00 2003-02-20 Page 15/20 www.hbe.co.kr
(iii) Before unplugged COMBO MP3 N Drive from USB port in Windows ME/2000/XP
make sure you go to the right hand bottom of the screen to stop the USB device.
Otherwise, It may result in losing data that you have saved on COMBO MP3 N Drive
(iv) Linux uses a so-called
“
USB Manager.
”
Which does automatically load kernel
modules(drivers) for USB devices, Its loads only drivers for devices that are present
on the USB bus to reduce memory usage, Per default, the USB Manager does not
come with the USB Drive pre-configured. However, you can easily configure the
USB Manager to automatically recognize the USB Drive yourself. Just add the following
To the configuration file.
usbmgr.conf (usually in /etc/ usbmgr): vendor 0xd7d product 0x100 module scsi_mod,
usb_storage.
This line identifies the USB Drive and tells the USB Manager to load the SCSI as well as
The USB storage modules, The SCSI modules is needed in order to talk to both SCSI
And USB storage devices, While the usb_storage module is needed to talk to USB
Storage devices.
Do not forget to either reload the USB Manager
’
s configuration or to restart the USB
Manager
For instance, do as root: / etc / init.d / usbmgr reload
