Hanasis ITX-D255R User Manual Download Page 3

Page: 3 / 31

ITX-D255R Mini-ITX Mother Board Manual

3 / 31

Contents

Chapter1 Introduction

----------------------------------------------------------------------------------------------

1.1 Specification ------------------------------------------------------------------------------------------------------- 5

1.2 System Block Diagram ------------------------------------------------------------------------------------------- 6

1.3 Mother Board Layout --------------------------------------------------------------------------------------------- 7

1.4 I/O Panel Connectors --------------------------------------------------------------------------------------------- 8

Chapter2 Installation

-----------------------------------------------------------------------------------------------

2.1 Screw Holes -------------------------------------------------------------------------------------------------------- 9

2.2 Pre-Installation Precautions ------------------------------------------------------------------------------------- 9

2.3 Installation of Memory Modules (SO-DIMM) ------------------------------------------------------------------ 9

2.4 Expansion Slot (PCI Slot) ---------------------------------------------------------------------------------------- 10

2.5 Jumper Setup ---------------------------------------------------------------------------------------------------- 10

2.6 Onboard Header and Connectors ------------------------------------------------------------------------------- 11

2.7 I/O Connectors ---------------------------------------------------------------------------------------------------- 16

2.8 SerialATA(SATA) / SerialATA2(SATA2) Hard Disks Installation ---------------------------------------------- 18

2.9 Hot Plug Function for SATA / SATA2 HDDs -------------------------------------------------------------------- 18

2.10 Driver Installation Guide ---------------------------------------------------------------------------------------- 18

2.11 installing Window7 on SATA / SATA2 ------------------------------------------------------------------------- 18

Chapter3 UEFI SETUP UTILITY ----------------------------------------------------------------------------------- 19

3.1 Introduction -------------------------------------------------------------------------------------------------------- 19

3.2 Main Screen -------------------------------------------------------------------------------------------------------- 20

3.3 Advanced Screen -------------------------------------------------------------------------------------------------- 20

3.4 Feature Screen ---------------------------------------------------------------------------------------------------- 27

3.5 Chipset Screen ---------------------------------------------------------------------------------------------------- 28

3.6 Boot Screen -------------------------------------------------------------------------------------------------------- 29

3.7 Security Screen ---------------------------------------------------------------------------------------------------- 29

3.8 Exit Screen --------------------------------------------------------------------------------------------------------- 30

Chapter4 Software Support ---------------------------------------------------------------------------------------- 31

4.1 Install Operating System ----------------------------------------------------------------------------------------- 31

4.2 Support CD Information ------------------------------------------------------------------------------------------ 31

Summary of Contents for ITX-D255R































Search results

Summary of Contents for ITX-D255R

Reviews:

Related manuals for ITX-D255R

Brands by name

Popular brands

Hanasis ITX-D255R, User Manual

Search results

Summary of Contents for ITX-D255R

Reviews:

Related manuals for ITX-D255R

Brands by name

Popular brands