Contents
System Installation
System Introduction
BIOS
Appendix
Using the product
Stand
Rear Cover
HDD
EMI
9.7” Dual monitor
15” Dual monitor
Wall mount
NFC
Barcode Scanner
MSR
Assembly &
Disassembly
NFC - Step 3
Main
Advanced
Topstar
Chipset
Aptio Setup Utility - Copyright (C) 2011 American
Boot
Security
Save & Reset
Discard Changes and Reset
Restore Defaults
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
UEFI : Built - in EFI Shell
SATA SM : TOSHIBA MQ01ABD032
Boot Override
Intel RC Version
No
Yes
Save & reset
Save configuration and reset ?
Main
Advanced
Topstar
Chipset
Aptio Setup Utility - Copyright (C) 2011 American
Boot
Security
Save & Reset
[Enabled]
Serial Port
Serial Port 2 Configuration
Version 2.14.1219. Copyright (C) 2011 American
[Auto]
0V
12V
Change Settings
Device Settings
IO=2F8h; IRQ=3;
Serial Port Voltage
[0V]
5V
Serial Port Voltage
Main
Advanced
Topstar
Chipset
Aptio Setup Utility - Copyright (C) 2011 American
Boot
Security
Save & Reset
IT8786
IT8786 Super IO Configuration
IT8786 Super IO Chip
Version 2.14.1219. Copyright (C) 2011 American
▶ Serial Port 2 Configuration
▶ Serial Port 3 Configuration
▶ Serial Port 4 Configuration
▶ Serial Port 5 Configuration
▶ Serial Port 6 Configuration
▶ Parallel Port Configuration
▶ Serial Port 1 Configuration
④ Select the COM2 or COM3 Configuration and Select Port Voltage.
⑤ The initial value is “0V”. Change the value to 5V for NFC.
⑥ Select the “Save & reset - Yes”. After that, Turn off the system.
Do not select 12V. (refer to No.④)
The powered COM is only COM2 and COM3. (refer to No.③)
