19
II. INSTRUCTIONS FOR USE
Before switching on the appliance, carefully read this
instructions manual which contains important information
about correct and optimum use of the appliance. For further
information about the performance characteristics and
washing machin consult your local dealer.
●E e si o ths
the performance of a wash and rinse the
other parts of the line product is going to be mounted by a
qualified technician will ensure that there is node crease in
performance.
●Pe iodi all
(at leastonce a year) should be of general
controldevice. For this purpose, we recommend that a service
agreement
with
the
competent
service.
● The
maximum water hardness
°F
and 1000mS /cm
5 °C
conductivity value. These value shave a value on aproduct
that may ocur when using tap water is not covered by the
guarantee.
●The a hi e
will be placed into the plates using a basket
placed at intervals allowed by the appropriate area.
●Do ot pla e the
machine in to the machine interior cabin
height of the glasses over. (max.185 mm)
1.
DESCRIPTION OF THE CONTROL PANEL
1.1.
INTRODUCTION
To fa ilitate fa ilia isatio ith the o e a fu tio s, efe to
the fold-out page at the end of this booklet, illustrating the
control panel.
The different functions available on the various models are
described below.
Some functions are common to all models while others are
only available on certain models.
1.2.
CONTROL PANEL
(
refer to figure at end of booklet)
A
-
On-Off (opening and closing)switch
B
-
Power Lamp
C
-
Heat lamp
D
- Indicator lamp
E
-
Program switch
USING THE APPLIANCE
2.COMMISSIONING
(Please refer to the shape of the control panel at the end of
the booklet)
Information
Before opening the device, make sure the device is connected
to the ground line and power source. Wateron / off, turn the
valve must open.
2.1 TURNING ON THE APPLIANCE
●
"A"
On-Off switchis pressed.
B
number power light will
illuminate
.
Make sure the machine's door is closed. The
machine will begin the process of obtaining water. At the end
of the water import process automatically when the water
heating process will start. The heating processis complete, the
"C"
heat lamp will be lit. Thiss how that washing machine is
ready. In this case, placing the basket with the basket to wash
soiled dishes will be placed into the machine. The basket after
placing the cap back on the machine will be closed. To begin
the process of washing key, pressed program number the
"E
".
The machine will begin the process of washing.
(At the
drainage pump devices right turn the key)
During this
process,
"D"
indicator light will illuminate to wash. When the
light turns off washing is finished. But after waiting for 5
seconds of the machine, a rinsing process will be in the range
of 15-20 seconds. After this process completes coveris opened
and removed the dishes were washed.
●
Try to put the dishes into the machine free of rough waste.
This wash will significantly affect performance.
●
First use the process of washing machine water temperature
is not heat will create transition to a negative situation.
Cleaning chemicals used in there action with unheated waterin
the washing machine will be foamy water.
●
Mechanical polishing is abuilt-inrinse aid dosing pump
through the process itself will take place. You can learn on this
subject by the authorized dealer.
● The a hi e doi g dete ge t dosi g
process with an
external pump. For the connection detergent dosing and
electrical connectors marked on the machine.
2.1 TURN OFF THE APPLIANCE
Daysat the end ofthe device beforethe end ofthe washing
processmust beclosed position, the numberkeys"A" and"B".
"C"numbers, be surethe power lightis off.
