
EN
13
5
Adjust the height of the cross-sections.
Secure the locking clamps (C) with screws (G).
6
Adjust the stays to the height of the car and
tighten the locking handle (H) by hand.
1
2
Pull out the U-tube (B) from the straight tubes (A).
Fit two locking clamps (C) on each straight tube (A).
Adjust the position of the locking clamps.
Insert the stays (E) through the locking clamps (C).
3
4
Screw the headless screws (I) in one end of the
stays (E). Attach an appropriate end stop (F) on
the stays (E).