Hamron 220-115, Operating Instructions Manual

Page: 23 / 28

ENGLISH
23
Connection

The machine must be connected to the mains supply with a residual current device with a
maximum tripping current of 30 mA.

IMPORTANT: Only use clean water.

Use a suitable filter if there is a risk of sand getting into the inlet.
Safety devices

The machine is equipped with an overpressure valve.

The spray gun has a trigger lock.

The motor is equipped with overheating protection. The machine starts again after a few minutes,
when it has cooled.
Symbols
Read the Operating Instructions before use
Warning: Indicates a potentially dangerous situation.
Wear safety glasses.
Equipment, class II. Double insulation.
TECHNICAL DATA
Rated voltage 230 V ~ 50 Hz
Output 1300 W
Safety class II
Protection rating IPX5
Rated pressure 70 bar
Max. pressure 100 bar
Max. inlet pressure 7 bar
Rated flow 5.5 l/min
Rated temperature 4
–40°C
Weight 5.2 kg
Sound pressure level, L
pA
77 dB(A), K=3 dB(A)
Measured sound power level, L
wA
90 dB(A), K=3 dB(A)
Guaranteed sound power level, L
wA
92 dB(A)
Vibration level 2,5 m/s²
Always wear ear protection!