13
EN
SAFETY INSTRUCTIONS
•
Read these instructions carefully before installation
and save them for future reference.
•
Always comply with the applicable laws and
regulations for the installation and use of auxiliary
lights.
•
Disconnect the negative/chassis earth cable from
the battery before connecting the product, to avoid
damage from short-circuiting during the installation.
•
Follow as far as possible the existing cable routing
for installation of new cables.
•
Secure the cable and any excess length (neatly
gathered) carefully with cable ties, electrical tape,
or the equivalent.
•
Cable grommets through the firewall should be at a
safe distance from moving parts.
WARNING!
•
The product must only be used within its rated
voltage range, 9 to 36 VDC.
•
The light source gets hot when the product is
switched on. Allow the light source to cool for at
least 30 minutes before touching or handling it.
Summary of Contents for 025955
Page 3: ...1 1 2 3...
Page 28: ......
