![background image](http://html1.mh-extra.com/html/hamron/012459/012459_operating-instructions-manual_3478317025.webp)
EN
25
DESCRIPTION
Charges most batteries (maintenance-free,
lead/acid, calcium/calcium, gel and AGM).
9-step charging with reconditioning mode
and memory function. Spark, overheating,
short-circuiting and reverse polarity protection.
Supplied with battery clips and cable with a plug.
1. Charging current
2. Battery type
3. Current/Voltage
4. Reconditioning
5. Direct current unit
A. Connection fault/poor contact
B. Weak battery
C. Overheating
D. Charge indicator
Read more in section
Symbols and functions.
USE
BATTERY CHARGING
WARNING!
• Never charge a frozen battery.
• Never charge the battery when the
engine is running.
• Always wear safety glasses when
handling batteries.
The contact clips on the charging leads are
colour coded, red for positive (+) and black for
negative (–). Check which battery terminal is
earthed (connected to the vehicle chassis).
1. Connect the red contact clip to the
battery's positive terminal (+). Now
connect the black contact clip to the
vehicle chassis, at a safe distance from
the battery and all the parts of the fuel
system.
batteries and other electrical
devices. Sparks can cause
explosions.
• Only use the product in an
open, well ventilated area.
• Do not smoke or allow sparks
or naked flames to come
near the battery or motor.
Batteries emit explosive gas.
SYMBOLS
Read the instructions.
For outdoor use only.
Safety class II.
Approved in accordance with the
relevant directives.
Recycle discarded product in
accordance with local regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Input rated current
2.4 A
Charging voltage
12 VDC
Charging current
25 A
Charging capacity
75 – 500 Ah
Battery types
AGM, GEL, MF, CAL
Reconditioning mode
Yes
Number of charging steps
9
Spark and reverse polarity protection
Yes
Protection rating
IP20
Size
25 x 26 x 12 cm
Summary of Contents for 012459
Page 3: ...1 A 5 D 1 2 3 4 B C...