EN
12
• Do not touch the LED bulb’s light emitting
surface when the LED bulb is on.
NOTE:
• Check before fitting that the LED bulb
(especially the bulb glass) is free of
contamination, dust and damage.
Do not fit the bulb in the vehicle if it
is contaminated, dusty or damaged.
• The ballast is waterproof and heat
resistant. However, avoid fitting them
close to hot parts.
• Check that the bulb is of the right type
before fitting.
• Disconnect the vehicle’s battery before
removing the original bulb and fitting
the LED bulb.
IMPORTANT:
• Once installation is complete, check that
the LED headlight works as normal and
that no warnings are shown in the
vehicle.
• Check that the headlight casing’s rear
covers are installed correctly.
• Do not position the ballast close to hot
parts.
• Make sure to route the wiring so that it
does not affect other wiring.
• Do not bend the wiring too sharply.
INSTALLATION (H4)
NOTE:
The following instructions are only a guide.
Fitting with the heatsink outside
the rear cover
1. Turn the LED bulb’s base anti-clockwise
separate it from the adapter. Remove the
original bulbs and fit the H4 adapter in
the headlight casing.
FIG. 3
TECHNICAL DATA
Luminous flux
2200 lm
Output 16 W
Input voltage
10V – 30 V
Life span
30,000 hours
Colour temperature
5700 K
Barrier temperature LED
<75 °C
DESCRIPTION
FUNCTIONS AND FEATURES
• Dippable bulbs (H4)
• Passive cooling: Heatsink and air guiding
• Material, casing: Die-cast aluminium
ASSEMBLY
BEFORE ASSEMBLY
Check that the LED-lamp fits into the headlight
casing.
1. Requisite space for LED bulb fitted outside
the rear cover.
2. Requisite space for LED bulb in headlight
casing.
FIG. 1
Check how the original bulb is fitted.
3. Original bulb fitted outside the rear cover.
4. Original bulb fitted in headlight casing
with metal pins.
FIG. 2
WARNING!
• Check before assembling that the LED
bulb’s light emitting surface is clean.
• Do not look into the beam when the LED
bulb is on.