background image

• After each use, clean the 

unit thoroughly and apply a light coat of vegetable oil to interior to 

prevent rusting. Cover the unit to protect it from excessive rusting. 
 

• Use caution when lifting or moving 

unit to prevent strains and back injuries. 

 

• We advise that a fire extinguisher be on hand. Refer to your local authorit

ies to determine 

proper size and type of fire extinguisher. 
 

• Store the 

unit out of reach of children and in a dry location when not in use. 

 

• Do not attempt to service 

unit 

other than normal maintenance as explained in “After

-Use 

Safety” and “Proper Care & Maintenance” sections of this manual.

 

 

 

OPENING AND CLOSING FRONT CAM LOCK DOOR. 

  Slightly lift door to engage and center the door between locking tabs.  

  With your right hand on the right side of the door push door closed until the cam locks 

are inline with the locking tabs. 

  Turn cam locking handle counter clockwise until the cam locks fully engage the locking 

tabs. 

  Over time your door may become misaligned, to readjust simply loosen the 6 hinge bolts 

located on the inside of the cook box and the locking tab bolts which are located in the 

12 o’clock and 6 o’clock positions inside the cook box. 

 

  Close the door and ensure the gap between door flange and cook box flange do not 

exceed 3/16 of an inch. Have a friend help you put pressure on the door to hold the door 
in place while you retighten the hinge bolts and then the locking tab bolts.  

  Once all of the bolts have been tightened open and close the door slightly lifting the door 

to locate between the two locking tabs, locking cam and locking tabs should be aligned 
and operate smoothly.  

  Use care when adjusting door to ensure cam lock and locking tabs are aligned if they 

are not and you force the cam lock to engage the locking tabs in a misaligned position 
you may damage the locking tabs.  

 

SEASONING YOUR NEW HAMRFORGE BEAST SMOKER 

  Open chimney baffles to the wide-open position. 

  Open air control damper on the fire box to the wide-open position. 

  Open front door and slide all available grills onto the slides inside the cook box. 

  Wipe units down using vegetable oil, lard or olive oil. (do not apply to any other surfaces 

other than the grill themselves) 

  Using your favorite hardwood or charcoal light a fire inside the fire box. 

  With the lid and front door closed allow the unit to reach a minimum temperature reading 

of 375 degrees Fahrenheit. Hold this temperature for 15-20 minutes. 

  Close the air control damper to ¼ of an inch opening 

Summary of Contents for SB-0000-1










Reviews: