Assembly — Attaching the Fan Blades
Attaching the blades to the
blade arms
7
Fastening the blade
assemblies to the motor
B
D
C
BB
RR
WARNING:
To reduce the risk of personal injury, do not
bend the blade arms (D) while installing, balancing the blades
(C), or cleaning the fan. Do not insert foreign objects between
rotating fan blades (C).
□
Fasten the blade assemblies to the fan motor
assembly (B) by lining up the slots of the motor (RR)
with the tabs on the blade arms (QQ).
□
Tighten the two blade arm screws with lock washers
(BB) already installed in the blade arms (D).
□
Repeat this procedure for the remaining blade arms
(D).
6
□
Hold the blade (C) with hands close to the blade arm
(D), align the key-slot holes (NN) with the blade arm
posts (OO) and press the blade down firmly. Ensure
the key-slot holes (NN) are properly seated on the
blade arm posts (OO).
□
Firmly slide the blade (C) away from the blade arm (D)
until the blade (C) engages in the spring locking
mechanism (PP). Make sure the spring of the spring
locking mechanism (PP) is upward and the butt of the
spring locking mechanism (PP) is against the edge of
the blade.
C
NN
OO
D
C
D
PP
To install the blade to the blade arm:
□
Press down the spring locking mechanism (PP) to
release the blade (C) from the blade arm (D). Slide the
blade (C) toward the blade arm (D) until the blade (C)
disengages from the spring locking mechanism (PP).
Carefully push the blade (C) up to detach from the
blade arm (D).
To detach the blade from the blade arm:
WARNING:
Failure to properly seat the blades (C) on the
blade arms (D) and engage in the spring locking mechanism
(OO) could result in the fan blades (C) loosening and possibly
falling.
11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
