B
DD
DD
A
C
B
DD
C
7
Installing the canopy
8
Attaching the canopy
bottom cover
11
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
□
Tuck the connections neatly into the ceiling outlet
box.
□
Slide the canopy (B) up to the mounting bracket (A)
and place the key hole on the canopy (B) over the
loose mounting bracket screw (DD) on the mounting
bracket (A). Turn the canopy (B) clockwise until the
canopy (B) locks in place at the narrow section of the
key holes.
□
Align the circular hole on the canopy (B) with the
remaining hole on the mounting bracket (A). Secure
the mounting bracket screw (DD) previously removed
in the hole and tighten the two mounting bracket
screws (DD).
WARNING:
Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball/downrod
assembly (D) before attaching the canopy (B) to the mounting
bracket (A) by turning the canopy housing until it drops into
place.
NOTE:
Adjust the mounting bracket screws (DD) as
necessary until the canopy (B) and canopy bottom cover (C)
are snug.
□
Attach the canopy bottom cover (C) to the canopy
mounting screw heads on the bottom of the canopy
(B) by inserting the screw heads into the key slots in
the canopy bottom cover (C) and rotating the canopy
bottom cover (C) clockwise.
Assembly — Hanging the Fan (continued)
