Installing the Light Kit 10.
N O T E :
B e f o r e s t a r t i n g i n s t a l l a t i o n ,
disconnect the power by turning off the
circuit breaker or removing the fuse at fuse
box.
Turning power off using the fan switch is not
sufficient to prevent electric shock.
1. Remove the 1 of 3 screws from the
switch housing plate and keep it for
future use. Loosen the other 2 screws
(Do not remove)
2.
Install the switch housing to the switch
housing plate by feeding the wires from
fan through the hole of switch housing,
then place the switch housing key holes
over the 2 screws previously loosened
from the switch housing plate, turn
switch housing until it locks in place at
the narrow section of the key holes.
Secure by tightening the 2 screws
previously loosened and the one
previously removed.(Figure 17)
3.
Make wire connections: Connect the 9-
pin plug from the fan to the 9-pin plug
from the switch housing.
4.
Locate two single white and blue wires
in the switch housing labeled FOR
LIGHT.
5.
Make the polarized plug connections:
-White to white
-Blue to black
Figure 17A
Bulbs
Glass shade
Screws
Connection
plugs
Light kit
Figure 17
Switch
housing
Screws
9-Pin plugs
Switch housing
plate
6.
Carefully push all wires back into the
switch housing. Attach the light kit
fitter by aligning its keyhole slots with
the three screw holes and reversing
switch on the side of switch housing.
Tighten the three screws securely to
prevent the light kit from vibrating
loose.
7.
Pass the two pull chains on the switch
housing through the chain holders
located on the light fitter, install the
fobs to the pull chains.
8.
Install two 60 watt (max.) Bulbs (
Included) and glass shade by turning
clockwise until snug. DO NOT OVER
TIGHTEN (Figure 17A)
9.
Restore power and your light kit is
ready for operation.
Fob
Fan without Light Kit
(Optional)
Your fan is designed with light kit, we also
prepare a empty switch box cover for your
choice in case you intend to install the fan
without light kit. Proceed the followings for
switch box assembly:
NOTE:
Light bulbs have no warranty, can
be purchased at local light bulb specialty
store or from our service center.
