HAMPTON BAY SW19129-A ORB, Use And Care Manual

Page: 15 / 20

Attaching the light kit plate to the the switch box
Remove one of the screws (LL) from the switch box (J) and loosen the other two screws (LL), but do not remove.
While holding the light kit plate (K) under your fan, snap the white connection plug from the switch box (J) to the
white connection plug from the light kit plate (K). Snap the black connection plug from the switch box (J) to the
black connection plug from the light kit plate (K).
Place the key holes from the light kit plate (K) over the two screws (LL) previously loosened from tthe switch box (J).
Turn the light kit plate (K) until it locks at the narrow section of the key holes. Secure by tightening the two screws (LL)
previously loosened and the one screw (LL) previously removed.
CAUTION: To Reduce The Risk Of Electric Shock, Disconnect The Electrical Supply Circuit To The Fan
Before Installing The Light Kit.
10
J
BLACK WHITE
K
LL