background image

2

Table of Contents ................................................................ 2

Safety Information ............................................................... 2

Warranty ............................................................................... 3

Pre-Installation .................................................................... 3

Installation ............................................................................ 6

Assembly .............................................................................. 7

Operation ........................................................................... 11

Care and Cleaning ............................................................. 12

Troubleshooting ................................................................. 12

1.  To reduce the risk of electric shock, ensure the electricity has been 

turned off at the circuit breaker or fuse box before you begin.

2.  All wiring must be in accordance with the National Electrical Code 

ANSI/NFPA 70-1999 and local electrical codes. Electrical installation 
should be performed by a qualified licensed electrician.

3.  The outlet box and support structure must be securely mounted and 

capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed 
outlet boxes marked “Acceptable for Fan Support of 35 lbs. (15.9 kg) 
or less.”

4.  CAUTION - To reduce the risk of injury to personst the fan must be 

mounted with a minimum of 7 ft (2.1 m) clearance from the trailing 
edge of the blades to the floor.

5.  Do not operate the reversing switch while the fan blades are in 

motion. You must turn the fan off and stop the blades before you 
reverse the blade direction.

6.  Do not place objects in the path of the blades.
7.  To avoid personal injury or damage to the fan and other items, use 

caution when working around or cleaning the fan.

8.  Electrical diagrams are for reference only. Light kits that are not 

packed with the fan must be UL listed and marked suitable for use 
with the model fan you are installing. Switches must be UL General 
Use Switches. Refer to the instructions packaged with the light kits 
and switches for proper assembly. 

9.  After making electrical connections, spliced conductors should be 

turned upward and pushed carefully up into the outlet box. The 
wires should be spread apart with the grounded conductor and the 
equipment-grounding conductor on one side of the outlet box.

10.  All setscrews must be checked and retightened where necessary 

before installation.

WARNING:

 To reduce the risk of personal injury,

do not bend the blade brackets (also referred to as
flanges) during assembly or after installation. Do not
insert objects in the path of the blades.

WARNING:

 To reduce the risk of fire or electric

shock, do not use this fan with any solid-state speed
control device.

WARNING:

 To avoid possible electrical shock,

turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed 

electrician.

WARNING:

 Electrical diagrams are for reference

only. Optional use of any light kit shall be UL-listed
and marked suitable for use with this fan.

Safety Information

Table of Contents

CAUTION:

 To reduce the risk of personal injury,

use only the screws provided with the outlet box.

CAUTION:

 To avoid personal injury or damage to the fan 

and other items, use caution when working around or 
cleaning the fan.

WARNING:

 To reduce the risk of fire, electric shock 

or personal injury, mount to outlet box marked 

“Acceptable for fan support of 35 lbs. (15.9 kg) or 

less”, and use screws provided with the outlet box.

READ AND SAVE THESE INSTRUCTIONS

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired operation.

Summary of Contents for STONERIDGE EF600K-52














Reviews: