10
Installing the glass shades and bulbs
□
Remove the thumb screw (MM) from the threaded socket
of the light kit (E) by turning the thumb screw (MM)
counterclockwise until it unlocks.
□
Insert the glass shade (F) into the light kit cowling and turn
the thumb screw (MM) clockwise to tighten and secure the
glass shade. Repeat for the remaining shades.
□
With power off, screw the LED bulbs (I) into the sockets.
□
Attach the pull chain extensions (AA) to the light pull chain
and fan pull chain.
2
CAUTION:
Make sure the power is off before attaching or
removing the glass shades.
WARNING
: Allow the glass shades to cool completely before
removing.
Assembly - Attaching the Light Kit Fitter Assembly
Attaching the light kit fitter assembly
□
Remove the three screws (QQ) from the light kit fitter
assembly (E).
□
Connect the wires exiting the bottom of the motor assembly
(B) by connecting the molded adaptor plugs together (blue to
blue, and white to white).
□
Slide the light kit (E) and secure it to the switch housing using
the three screws (QQ) that were removed in the first step.
1
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
E
F
I
AA
MM
