Page 19
AVERTISSEMENT:
1. Avant de commencer
installer ce luminaire ou d'enlever l'ancien luminaire,
d connectez le courant en teignant le disjoncteur ou en enlevant le fusible
correspondant du coffret fusibles.
2. CONSULTER
UN
ELECTRICIEN
QUALIFIE
POUR
TOUTE
QUESTION RELATIVE A L'ELECTRICITE.
3. En cas de questions non relatives
l' lectricit
propos de ce luminaire,
veuillez contacter notre centre de Service
la Client le au 1-877-527-0313
ou visiter www.homedepot.com. Veuillez indiquer votre UGS (240-336
black fixture, 240-339 white fixture, 433-659 bronze fixture) ou UPC
(725916814205
Luminaire
noir,
725916814212
Luminaire
blanc,
6940500311234 Luminaire bronze).
4. Conserver votre re u et ces Instructions comme Preuve d'Achat.
OUTILS REQUIS POUR L'ASSEMBLAGE & L'INSTALLATION
(non inclus):
Ampoule
Lunettes de Protection
Echelle
Gants
D nudeur de c bles
(100 watts maxima)
lectriques
(ou quivalent LFC)
Tournevis t te plate
Tournevis
croisillon
Ruban adh sif
Pince pour
Joint en Caoutchouc Silicone
isolant
c bles lectriques
pour un usage ext rieur
Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
1ea Ground Screw (#11)
2ea Outlet Box Screws (#12)
2ea Mounting Screws (#13)
1ea Cross Bar (#14)
2ea Wire Connectors (#15)
2ea Lock Nuts (#18)
INSTALLATION INSTRUCTIONS:
1. Screw the two Mounting Screws (#13) into the Cross Bar (#14). Mount the Cross Bar (#14)
to the Outlet Box (#16) using the two Outlet Box Screws (#12). [Make sure the threads of
the Mounting Screws (#13) are facing outside when the Cross Bar (#14) is attached to the
Outlet Box (#16).]
2. Wrap the ground wire from the fixture around the Ground Screw (#11) on the Cross Bar
(#14), and then connect the ground wire from the fixture to the ground wire from the
Outlet Box (#16). Connect the white wire from the fixture to the white wire (neutral wire)
from the Outlet Box (#16), and the black wire from the fixture to the black wire (live wire)
from the Outlet Box (#16). Cover the two wire connections using the two Wire
Connectors (#15). Wrap the two wire connections with electrical tape for a more secure
connection. Position the wires back inside the Outlet Box (#16).
Note: If you have
electrical questions, consult your local electrical code for approved grounding methods.
3. Mount the body of the fixture on the wall by aligning the protruding Mounting Screws
(#13) all the way through the holes on the Wall Plate (#9). Be careful not to pinch any of
the wires between the fixture and the Outlet Box (#16). Tighten the fixture to the wall by
screwing the two Lock Nuts (#18) onto the two protruding Mounting Screws (#13).
4. Once the fixture is mounted on the wall, caulk the space between the wall and the upper
3/4 area of the Wall Plate (#9) to prevent water seeping into the Outlet Box (#16). Leave
the bottom 1/4 area uncaulked for drainage of any water which might leak into the
enclosure.
5. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the
light switch on to activate the fixture.
6. If it is daylight, the light bulb will not illuminate. To test the fixture, cover the Photocell
(#10) with electrical tape to illuminate the light bulb. Once you confirm the light bulb
illuminates, remove the electrical tape.
