8
Assembly - Hanging the Fan (continued)
Completing the fan assembly
Making the electrical connection
□
Remove the two screws (YY) on two diagonal sides from
the top of the mounting plate (A) and loosen the other two
screws (XX).
□
Align the two key slots on the top of the motor housing (C)
with the two screws on the mounting plate (A). Push the
motor housing (C) up and turn it clockwise to lock in the
mounting plate (A). Tighten the two screws (XX).
□
Install the two screws (YY) that were removed at the
beginning of this step into the remaining two holes and
tighten the four screws firmly.
4
3
□
Connect the fan motor green wires to the household green or
bare wire using a plastic wire connectors (BB).
□
Connect the fan motor white wire to the household white wire
using a plastic wire connectors (BB).
□
Connect the fan motor black and blue wires to the household
black wire using a plastic wire connectors (BB).
□
Secure each wire connecting nut using electrical tape.
□
Turn the plastic wire connectors (BB) upward and push the
wiring into the outlet box (FF).
IMPORTANT:
Use the plastic wire connectors (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
WARNING:
Each plastic wire connector (BB) supplied with this
fan is designed to accept up to one 12-gauge house wire and
two wires from the fan. If you have larger than 12-gauge house
wiring or more than one house wire to connect to the fan wiring,
consult an electrician for the proper size wire nuts to use.
B
A
C
YY
YY
XX
Outlet box
in the ceiling (FF)
Black and Blue
White
Green or bare
Green
A
B
BB
