7
Assembly
1
Attaching the table top
�
2
Placing and connecting the gas tank
3
4
Placing the Glass beads
With the help of another person, carefully place the tabletop
(N) onto the firepit base (O). After making any necessary
adjustments to the alignment of the tabletop (N) and the
assembled base (O), use the bolts (BB) and washers (CC) .
Guide the bolts through the holes in the firepit base (O) into
the pre-drilled holes under the tabletop (N). Do not tighten
completely. Repeat on the other three sides.
�
Open the tank door, place the tank in the holder and
connect the regulator. Screw the black handle clock-wise
to tighten. Turn the handle counterclock-wise to remove.
The hose must point down. Open the control door and
check that the valve is turned all the way clockwise to the
“OFF” position.
NOTE:
Holes do not go through to the top of the table.
Holes shown for illustration purposes only.
Testing for leaks
�
Open the tank valve. Apply a solution of soapy water
to the tank-regulator connection and to the valve-hose
connection to check for leaks. If soap bubbles continue to
form, the connection has a leak. If a leak is found, close the
tank valve and tighten all connections.
WARNING:
CC
BB
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
�
Pour the glass beads (M) into the burner. Completely cover
the burner.
�
Remove the cardboard cover from the ignition well.
CARDBOARD COVER
M