HAMPTON BAY ROCK CLIFF STEEL WICKER FRS81146-2PK, Use And Care Manual, Page: 6 / 8

6
Assembly (continued)
3
Attaching The Chair Seat To The Chair Back
4
Attaching The Left And Right Arm To The Chair Back
Attach the chair seat (D) to the chair back
(A) using M6x40 combination bolts (BB).
Place the right arm (C) upside down on a soft surface.
Insert the pin on chair back (A) into the hole on the rear end of right arm (C).
Attach the chair back (A) to the right arm (C) using M6x20 combination bolt (AA).
NOTE: Loosely tighten all bolts using the hex wrench (CC).
NOTE: Loosely tighten all bolts using the hex wrench (CC).
BB
D
A
AA
A
C