6
Installation - New Construction
CAUTION: Make sure power is switched off at service
panel before starting installation.
NOTE:
Unit can be mounted in a ceiling or wall.
1
2
Joist or
wall stud
3
Joist or
wall stud
Fan housing placement
Place the fan housing next to a ceiling joist or wall stud. The
fan housing should be level and perpendicular to the joist or
stud.
Mount the fan housing
Mount the fan housing to the joist using long wood screw
where indicated.
Connect house and fan wires
Pull the wire through the hole and into the junction box (not
included). Using a quick connector, secure 120 VAC house
wiring from the wall switch to the fan as shown in the wiring
diagram on page 3.
NOTE:
Unit can be mounted in a ceiling or wall.
CAUTION:
If the electrical wires do not match the colors listed,
you must determine what each house wire represents before
connecting. You may need to consult an electrical contractor to
determine safely.
House
wires
Product
wires
Quick
connector
