7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation (continued)
6
Cutting Countertop to Size
□
Use a circular saw with a fine tooth blade with removeable
tape (1) on the cut line to minimize chipping.
□
Clamp a straight edge (2) to the top as a guide for your
circular saw to achieve a straight cut, especially when two
cut edges will be joined together to avoid any gaps.
NOTE:
Use a carpenter’s square to make sure your guide
is aligned properly.
NOTE:
Make sure to account for your blade offset when
setting.
2
1
7
Cutting Hole for Sink, Cooktop, etc.
□
Mark with removable tape (1) the outline of the cutout.
□
Drill a pilot hole to get jigsaw blade started.
□
Additional holes in all corners may be needed if all corners
require tight radii.
□
Cut two of the edges first, then attach a brace (3) to the
section that will be cut out (4) on that end to keep cutout
from falling through when cut is complete.
3
1
4
Summary of Contents for PLORAB386351270
Page 1: ......
