Assembly
Attaching the legs to the table top rim
With the assistance of another person, place the table top
rim (A) upside down so the pre-drilled corner holes
are visible.
Align and attach each of the four table legs (D) in the corners
of the table top rim (A), by inserting bolts (AA) with metal
washers (CC) through the pre-drilled holes.
Loosely tighten with the hex wrench (EE).
IMPORTANT:
Do not tighten completely until
assembly is completed.
1
Attaching the leg connector bracket
to the legs
Attach the leg connector bracket (C) to each of the table legs
(D) by inserting bolts (BB) with metal washers (CC) into the
pre-drilled holes, using the hex wrench (EE).
2
5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
IMPORTANT:
Each of the leg bolts should be attached and
initially tightened only a few revolutions. Then tighten further,
one bolt at a time, alternating between the four legs. Do NOT
fully tighten one leg before you attach the other legs.
Attaching the bolt caps and putting the
ceramic tiles onto the table frame
3
Tighten all the bolts using the hex wrench (EE).
Cover them with the plastic bolt caps (DD).
With assistance, turn the table in the upright position.
Carefully place the ceramic tiles (B) onto the table frame.
AA
A
CC
D
A
C
CC
BB
D
D
C
B
A