
11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Attaching the Fan Blades
Assembly - Attaching the Switch Cup
Attaching the switch cup
Attaching the blades to the blade
brackets
Fastening the blade
assemblies to the motor
11
9
10
□
Remove the four screws from the switch cup cover below fan
motor assembly.
□
Connect the wires exiting the bottom of fan motor assembly
with the wires from switch cup (E) by connecting the molded
adaptor connectors together.
□
Secure the switch cup (E) to the switch cup cover using the
four screws that were removed in the first step above.
□
Attach the pull chain extension (GG) to the fan pull chain.
□
Attach a blade (H) to a blade bracket (G) by inserting screws
(AA) into the holes in the blade (H) and through the blade
bracket (G). Note that the rubber washers are preattached to
the blade bracket (G).
□
Tighten each screw securely.
□
Repeat these steps for each blade (H) and blade bracket (G).
□
Fasten the blade assemblies to the fan-motor assembly (D) by
inserting the alignment post into the slot on the bottom of the
motor and tightening the pre-installed blade bracket screws
(TT) by inserting a screwdriver through the access hole (ZZ).
□
Repeat this step for the remaining blade assemblies by
rotating the motor until the next blade bracket screw can be
accessed through the access hole (ZZ) in the switch cup.
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
IMPORTANT:
Remove the rubber stopper on the black bracket
below the motor in order to attach the blade assembly to
the motor. Replace the rubber stopper to prevent water from
entering the switch housing and to reduce the risk of fire,
electric shock, or other personal injury.
IMPORTANT:
The switch cup cover has an access hole (ZZ) to
allow the screwdriver to reach the screws in the blade bracket.
Position the blade assemblies on the motor and tighten by
inserting the screwdriver through the access hole (ZZ).
G
H
AA
E
GG
D
G
ZZ
TT
H