7 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
assembly (continued)
4
Attaching the panels to the base
□
Locate the base (A).
□
Insert eight wood dowels (AA) into the holes on the base.
□
Align the holes on the bottom edge of the mantel assembly
with the wood dowels (AA) in the base. Push down until
flush.
□
Insert one large bolt (BB) and one washer (CC) into each of
the six holes in the four blocks at the bottom of the mantel
assembly. Tighten until secure. Do not strip the bolts by
overtightening.
5
Attaching the top
nOTe:
This top is heavy. It is recommended that you use
two people at this stage to prevent damage to the top of the
mantel assembly.
□
Locate the top (H) and place with the finished side down on
a clean dry surface.
□
Insert six wood dowels (AA) into the holes on the bottom of
the top (H).
□
Turn the top (H) over and ensure the finished side is facing
up. Align the holes on the top of the mantel assembly with
the wood dowels (AA) on the underside of the top (H). Push
down until flush.
□
Insert one large bolt (BB) and one washer (CC) into
each of the six holes in the four blocks on the top of
the mantel assembly attaching the top (H) to the mantel
assembly. Tighten until secure. Do not strip the bolts by
overtightening.
6
Inserting the firebox
□
Locate the firebox insert (K).
□
Insert the firebox into the mantel from the rear. Be very
careful not to scratch the base (A).
□
Viewing from the front of the mantel, ensure that the firebox
insert (K) is in the center of the opening.
A
AA
AA
CC
BB
H
AA
BB
CC
AA
K
A
