7
Assembly - [Love Seat]
1
Attaching armrests
□
Secure the seat panel (B1) to the armrest (C1) with
washers (DD) and bolts (CC) using the hex wrench.
2
Attaching the back panel
□
Align the back panel (A1) to armrests (C1), (D1) and the seat panel (B1).
NOTE:
Please note that the assembly holes for the
left and right side of the back panel is offset to avoid
misassembly. Place the back panel (A1) with the
curve facing outward from the chair frame.
AA
CC
DD
B1
C1
D1
AA
BB
DD
AA
CC
DD
AA
BB
DD
A1
B1
C1
D1
□
Place the left armrest (C1) on its rear side on a flat,
□
Align the seat panel (B1) to the armrest (C1).
IMPORTANT: You will need to align the seat panel (B1) to the
proper armrest by lining up the bolt holes on each part.
IMPORTANT: You Do not fully tighten bolts until the
end of Step 4.
□
Repeat the above procedure to attach the right armrest (D1).
□
Cover all bolts (CC) with bolt caps (AA).
□
Attach armrests (C1) and (D1) to the back panel (A1) with washers
(DD) and bolts (BB) using the hex wrench.
□
Attach the back panel (A1) to the seat panel (B1) with a washer (DD)
□
Fully tighten all bolts (BB) and (CC) once all bolts are in place.
□
Cover all bolts (BB) and (CC) with bolt caps (AA).
smooth surface.
and bolt (CC) using the hex wrench.