Remove one of the two light kit mounting screws (SS) from
the switch housing (I) and loosen the other one screw (SS).
(Do not remove.)
While holding the light kit (J) under the fan motor assembly
(F), snap together the two wire plugs (TT):
White to white
Blue to black
Place the key holes in the light kit (J) over the one screw (SS)
previously loosened from the switch housing (I). Turn the light
kit (J) until the light kit (J) locks in place at the narrow section
of the key hole. Secure by tightening the one light kit mounting
screw (SS) previously loosened and the one (SS) previously
removed.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
13
Assembly — Installing the Light Kit
Attaching the switch housing to
the mounting ring
11
Attaching the light kit to the
switch housing
12
Remove one of the three switch housing mounting screws
(PP) from the mounting ring (QQ) and loosen the other two
screws (PP). (Do not remove.)
While holding the switch housing (I) under the fan motor
assembly (F), snap together the wire connection plugs (RR).
Place the key holes in the switch housing (I) over the two
screws (PP) previously loosened from the mounting ring
(QQ). Turn the switch housing (I) until the switch housing (I)
locks in place at the narrow section of the key holes.
Securely tighten the two switch housing mounting screws
(PP) previously loosened and the one (PP) previously
removed.
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
PP
F
I
RR
J
F
TT
I
SS
