12
MOTOR MAINTENANCE
Cleaning of the log set is to be done only with a vacuum cleaner or by using a soft cloth, slightly dampened in water (if needed, a small
amount of dish soap can be added to the water) and dried using a clean, dry soft cloth. DO NOT use any abrasive household cleaners as
these products will damage the unit.
Always disconnect the appliance from the main power supply and allow it to cool before any servicing operation.
The motors used on the fan heater and flame blower are pre-lubricated for extended bearing life and require no further lubrication. However,
periodic cleaning/vacuuming of the appliance around the air intake and exhaust, as well as the fan heater is recommended. For heavy or
continuous use, periodic cleaning must be done more frequently. If the heater blows alternating cold and warm air, check the fan for free
movement and for debris restricting air flow. If the fan does not move freely, the unit must be turned off and the fan replaced immediately in
order to prevent further damage to the unit.
□
Turn off power to the unit.
□
Unplug the power cord from the outlet.
□
Allow the log set to cool if it has been operating.
Maintenance
Care & Cleaning
BEFORE ATTEMPTING ANY MAINTENANCE
