Assembly(Right arm)
1
Attaching the Right arm to the
2
Attaching the back
3
Adding the side skirt
4
Completing the assembly
□
□
□
□
Attach the seat (G) to the right arm (I) by aligning holes
on the seat (G) with the holes on the left arm (I) and
inserting bolts (AA) with washers (BB). Tighten half
way using the Hex wrench (DD). Do not tighten
completely.
Place the left arm (I) on a soft surface.
theback (H) with the two holes on the seat (G). Insert
bolts (AA)with washers (BB) and tighten half way using the
Hex wrench(DD). Do not tighten completely.
Attach the back (H) to the seat (G) by aligning two holes on
holes on the seat (G) with the holes on the side
skirt (J) and inserting bolts (AA) with washers (BB).
Tighten half way using the Hex wrench (DD). Do
not tighten completely.
Attach the side skirt (D) to the seat (G) by aligning
9
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
seat
G
I
AA
BB
G
I
AA
G
H
I
BB
AA
BB
BB
BB
CC
CC
F
E
Place the right arm (I) on a soft surface.
Attach the seat (G) to the right arm (I) ,fasten with
bolts (AA) with washers (CC). Tighten half way using
the Hex wrench (DD).
Tighten half way using the Hex wrench (DD).
Tighten half way
using the Hex wrench (DD).
Put the back ( H ) metal side into the hole of arm (I).
Attach right arm ( I) to the back (H),fasten bolts (AA) and
washer (CC).
Insert two pins on the back (B)into the holes on arm (I) ,
fasten bolts (BB) and washer (CC).
holes on the seat (A) with the holes on the side
skirt (D) and inserting bolts (BB) with washers (CC).
Tighten half way using the Hex wrench (DD). Do not
tighten completely.
Attach the side skirt (D) to the seat (G) by aligning
Check and make adjustment as needed.
Fully tighten all the bolts with the Hex wrench(DD) .
Place the seat cushion (F) and the back cushion(E)
on the chair.
This chair is now ready for your enjoyment.
□
□
□
□
G
I
H
BB
CC
AA
CC
CC
X2
AA
CC
CC
AA
X2
AA
G
I
X2
CC
X3
BB
