HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
3
Assembly and Installation (continued)
4
MOUNTING THE PHOTOCELL
□
Mount the photocell bracket (B) on the wall using the screws
(F) provided.
□
Snap the photocell (C) into the bracket (B). Route or coil the
excess wire to protect it. Avoid pointing the photocell at
nighttime light sources.
□
Cover the connection hole with the dust cap (D) when no
photocell control wire is connected.
NOTE:
Replacement photocells may be purchased at your local
retailer.
C
F
B
A
D
5
CONNECTING THE LIGHT FIXTURES
□
Route the wire (H) to the light fixtures. Be sure to leave
about 12 in. of wire after the last light fixture.
□
Align the wire (H) in the slot of the wire connector (K).
□
Press the wire connector (K) together until it is locked
around the main wire (H). The metal contacts should pierce
the insulation of the wire (H).
□
Secure the connection with electrical tape (not included).
□
Cover the wire (H) with mulch or bury it up to 6 in.
WARNING:
Be sure to leave a minimum of 10 ft. of wire between the
transformer and the first light fixture.
CAUTION:
The wire connector contacts have sharp edges. To avoid
injury, do not touch the metal contacts.
K
K
H
H
