background image

 17 HAMPTONBAY.COM
 

 

Please contact 1-855-HD-HAMPTON for further assistance.

FLAME CHARACTERISTIC

 

The flame pattern at the burner mesh should be visually checked whenever the heater is operated.

 

Normally, the burner flame is blue with yellow flame at the top. The burner mesh will become red hot.

 

If flames extend beyond the surface of the burner mesh, or there is the phenomena of flame lift or light back, or a black spot is 
accumulating on the burner mesh or reflector, the heater should be turned off immediately.

 

The heater should not be operated again until the unit is serviced or repaired.

SCREW AND BOLT CONNECTIONS

 

All screws and bolts, etc, should be checked and tightened on a regular basis.

STORAGE

 

Do not leave the patio heater exposed to outside weather conditions or stored in damp moist conditions.

 

To save space during long-term storage, the reflector can be removed. Take care to ensure the shape of the reflector is not 
damaged or deformed, as this will affect performance.

 

When using the heater after extended periods of storage, re-attach the reflector.

 

The heater should never be operated without the reflector in place.

 

If the heater is to be stored indoors, the gas bottle must be disconnected and left outside in a dry, well-ventilated area, away from 
any sources of heat or ignition.

 

Do not let children tamper with the bottle.

SERVICE

 

We recommend that servicing of this appliance should be performed either after every 100 hours of use or annually, which ever is 
achieved soonest. 

 

If your heater needs maintenance or is not working properly, please contact your local authorized agent for service. 

 

It is a necessity to contact an authorized source for replacement of parts and/or servicing.

 

This work must be carried out by a qualified gas technician. 

 

Spare parts may be obtained by contacting Hampton Bay Customer Service at 1-855-HD-HAMPTON.  

 

 

Manufactured by Universal Innovations. Kilcoole Industrial Estate, Kilcoole, Co. Wicklow, Ireland.

Care & Cleaning

 

Regularly clean your patio heater between uses and especially after extended periods of storage.

 

Ensure the heater control is turned fully to the off position, the gas supply is shut off at the regulator or bottle / cylinder valve, and 
the heater and its components are sufficiently cool before cleaning.

 

Never douse the heater with water when its surfaces are hot.

5010527

Yellow Tip
Primary blue flame

Maintenance

Summary of Contents for HD10





















Reviews: