MM
MM
E
E
10
Installation (continued)
10
Extending the closet pole to the
desired length
□
Grasp and pull a pole (E) apart until it is long enough to
reach from the shelving unit to the wall.
□
Repeat for each pole (E).
E
Care and Cleaning
□
To remove the part labels, gently rub a soft cloth moistened with a mild household cleanser over the part label. Then lift a corner of the
label and pull firmly but smoothly until the label comes off.
□
Dust as needed with a clean, lint-free absorbent cloth.
□
Spray furniture polish may be used when cleaning.
□
Scratches and nicks can be touched up with a furniture touch-up stick, shoe polish, or a crayon.
11
Attaching the poles to the
shelving unit
□
Place one end of the pole (E) into the pole support bracket
(MM) on the shelving unit so that the hole in the pole (E)
end fits over the peg in the pole support bracket (MM).
□
Adjust the pole (E) as necessary to fit between the shelving
unit and the wall.
□
Place the other end of the pole (E) into the pole support
bracket (MM) on the wall.
□
Repeat these steps for the remaining poles (E).