
39
Hampton
®
H27U-NG/H27U-LP Direct Vent Freestanding Gas Stove
installation
To Thermocouple IN
I H
O
L
F
F
O
N
O
O L
I
T
P
ON
OFF
Regency
White
(To THTP)
(To TH)
Gas In
DC
SPARKER
Cut here
Red
Remote
(OPTIONAL REMOTE)
Receiver
Remote
Red
Green
Red
White
Black
Ground /Green
White
Neutral
Live
Black
Black
Red
Black
Black
Fan Thermodisc
(normally open)
(120V AC)
Rotary Speed
Control
Green
Ground
ON
OFF
Fan
Fan
Wiring Diagrams
If any of the original wires as supplied with the appliance must be replaced, it must be replaced with CSA type SEW (200
o
C) or its equivalent.
CAUTION: Label all wires prior
to disconnection when servicing
controls. Wiring errors can cause
improper and dangerous opera-
tion.
This heater does not require a 120V A.C. sup-
ply for operation. In case of a power failure, the
burner switch and the optional remote control/
thermostat will continue to operate. However, a
120V A.C. power supply is needed for the fan/
blower operation.
Caution: Ensure that the wires do
not touch any hot surfaces and are
away from sharp edges.
Final Check
Before leaving this unit with the customer, the
installer must ensure that the appliance is firing
correctly. This includes:
1)
Clocking the appliance to ensure the correct
firing rate (rate noted on label) at 15 minutes.
2)
If required, adjusting the primary air to
ensure that the flame does not carbon.
First allow the unit to burn for 15 min. to
stabilize.
3)
Check for proper draft.
CAUTION
Any alteration to the product that causes
sooting or carboning that results in damage
to the exterior facia is not the responsibility
of the manufacturer.
WARNING: Electrical Grounding Instructions
This appliance is equipped with a three pronged (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded three-prong
receptacle. Do not cut or remove the grounding prong from this plug.
To Thermocouple IN
I H
O
L
F
F
O
N
O
O L
I
T
P
ON
OFF
Regency
White
(To THTP)
(To TH)
Gas In
DC
SPARKER
Cut here
Red
Remote
(OPTIONAL REMOTE)
Receiver
Remote
Red
Green
Red
White
Black
Ground /Green
White
Neutral
Live
Black
Black
Red
Black
Black
Fan Thermodisc
(normally open)
(120V AC)
Rotary Speed
Control
Green
Ground
ON
OFF
Fan
Fan