HAMPTON BAY GT-6891A-SSS, Use And Care Manual, Page: 4 / 6

4
Assembly
□
□
NOTE: Please ensure all M6 bolts are aligned and
assembled correctly. Fully tighten the bolts.
1 2
3
Attaching the "X" shape support bar
to the connector
Attach the "X" shape support bar (B) to the connector (C)
using M6x25 mm bolts (AA) and M6 washers (CC).
wrench (EE).
AA
CC
C
B
Attaching the table base to the connector
□
□
wrench (EE).
□
Cover the bolt heads with M6 bolt caps (DD).
Attach the table base (D) to the connector (C) using M6x25 mm
bolts (AA) and M6 washers (CC).
D
DD
CC
C
AA
B
□
□
□
Attaching the "X" shape support bar
to table top
Attach the "X" shape support bar (B) to the table top (A) using
M6x3 0mm bolts (BB) and M6 washers (CC).
wrench (EE).
BB
CC
DD
4
Positioning the table
□
Turn the table over. The table is now ready for use.
A
B
C
D
Cover the bolt heads with M6 bolt caps (DD).
Tighten all M6x25 mm bolts (AA) with the M6 socket
Tighten all M6x3 0mm bolts (BB) with the M6 socket
Tighten all M6x25mm bolts (AA) with the M6 socket