14
Installing the glass shade
Assembly — Installing the LED Light Kit
□
Raise the glass shade (L) up against the light kit
mounting plate (J) and secure the glass shade (L) to
the fan by turning the glass shade (L) counterclock-
wise until snug. DO NOT OVERTIGHTEN.
15
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
K
J
PP
13
Attaching the LED light kit to
the light kit mounting plate
□
Remove one of the three light kit mounting screws
(PP) from the light kit mounting plate (J) and loosen
the other two screws (PP). (Do not remove.)
□
While holding the LED light kit (K) under the fan motor
assembly (F), make the 2-pin wire connections:
- Red to red
- Black to black
□
Place the key holes in the LED light kit (K) over the
two screws (PP) previously loosened from the light kit
mounting plate (J). Turn the LED light kit (K) until the
light kit (K) locks in place at the narrow section of the
key holes. Secure by tightening the two light kit
mounting screws (PP) previously loosened and the
one (PP) previously removed.
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
L
J
