12
Operation (continued)
WARNING:
A leak test must be performed annually or if a part of the gas system is replaced.
LEAK TESTING OPERATION
WARNING:
WARNING:
DO NOT USE NEAR AN OPEN FLAME.
LEAK TESTING:
This must be done before initial use, annually, and whenever any gas components are replaced or serviced. Do not
of the regulator, hose, manifolds and valves. Bubbles will indicate a gas leak. Either tighten the loose joint or have the part replaced with one
If the leak cannot be stopped, immediately shut off the gas supply, disconnect it, and have the appliance inspected by a certi
installer or dealer. Do not use the appliance until the leaks have been corrected.
smoke while performing this test, and remove all sources of ignition. See the leak testing diagrams for areas to check. Turn all burner
controls to the off position. Turn gas supply valve on. Brush a half-and-half solution of liquid soap and water onto all joints and connections
