13
Installation (continued)
Connecting the gas
Fig.
P
U
S
H
NOTE:
4
5
Loading the battery
IMPORTANT:
Fig.
Fig.
Fig. 7
Please follow the above instructions
to replace the battery when needed.
If the knob (#5) is not properly threaded to the
outlet of the cylinder, gas leakage can occur.
U nscrew the battery box and insert the negative electrode side
of the battery into the bottom of the battery box .
Cover the battery with the plastic cover. (Fig.4 )
Connect the pressure regulator (# 4 ) to the tank by rotating
the knob (# 5 ) clockwise until it is fully secured. (Fig.5 )
M ake sure there is no leakage or damage
Please refer to the " L eak Check" information and instructions
on how to check for hose or burner damage on page 14 .
Close the door. (Fig.6 )
R emove the lid (G) and place rocks ( I ) into the fire bowl, making sure
to keep the igniter block (# 6 ) open. (Fig.7 )
