As
2
ssembl
Attaching the leg connector
Attach the leg connector (D) to the table legs (B) and the support tubes (C) using M6x25 combination hex bolts (BB).
ly ( (continued)
6
Use the wrench (EE) to loosely tighten the M6x25 combination hex bolts (BB).
Secure the support tubes (C) to the table top (A) by using ST5x12 screws (AA).
Once all bolts and screws are in place, tighten all bolts and screws completely, and place M6 bolt covers (CC) over the bolts.
D
D
AA
A
C
BB
CC
NOTE:
The self-drilling tool is not included for ST5x12 screws.
