2
l
5
Assembly (continued)
Connecting the support tube and back bar to the chair arms
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Place the right arm (A) on a soft surface.
Attach one end of the support tube (D) to the right arm (A) with M8x28 hex bolts (BB), M8 spring washers (GG), and M8
washers (FF).
Align the holes of the back bar (E) with the holes in the rear portion of the right arm (A).
Secure the back bar (E) to the right arm (A) with M6x18 bolts (CC) and M6 washers (EE).
Repeat this step to attach the left arm (B) to support tube (D) and the back bar (E).
Stand the assembly upright.
NOTE
: Loosely tighten the bolts with wrench (JJ) and hex
wrench (KK).
CC
EE
BB
GG
GG
FF
E
A