6
Assembly (continued)
2
Attaching the leg connector
Attach the leg connector (C) to the table legs (B) using M6x25 combination hex bolts (AA).
Use the wrench (DD) to loosely tighten the M6x25 combination hex bolts (AA).
Secure the table top (A) and the table legs (B) by using ST5x12 screws (BB).
Once all of the bolts and screws are in place, fully tighten all bolts and place on M6 bolt covers (CC).
BB
AA
CC
C
NOTE:
The
self-drilling tool for the ST5x12
screws (BB)
is not included.
