14
Assembly — Installing the Light Kit
13
Attaching the light kit to the light
kit mounting plate
14
Attaching the plastic cover to the
light kit and glass shade
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
Remove one of the three light kit mounting plate screws (VV)
from the light kit mounting plate (I) and loosen the other two
screws (VV). (Do not remove.)
While holding the 20W LED light kit (J) under the fan motor
assembly (F), snap together the wire connection plugs (WW) :
- White to white - Black to black
Place the key holes in the 20W LED light kit (J) over the two
mounting screws (VV) previously loosened from the light kit
mounting plate (I). Turn the 20W LED light kit (J) until the
20W LED light kit (J) locks in place at the narrow section of
the key holes. Secure by tightening the two light kit mounting
screws (VV) previously loosened and the one previously
removed.
Attach the plastic cover (TT) to the 20W LED light kit (J)
using the three screws.
Raise the glass shade (K) up against the 20W LED light
kit (J) and secure it to the fan by turning the glass
shade (K) clockwise until snug. DO NOT OVERTIGHTEN.
J
F
I
WW
VV
K
TT
UU
F
J
