8
Attaching the light kit mounting
plate to the mounting ring
9
F
GG
ZZ
□
Remove one of three mounting ring screws (GG) from
the mounting ring (ZZ) and loosen the other two
screws. (Do not remove)
□
Place the key holes in the light kit mounting plate (F)
over the two screws (GG) previously loosened from
the mounting ring (ZZ), and turn the light kit mounting
plate (F) until it locks in place at the narrow section
of the key holes.
□
Secure by tightening the two mounting ring screws
(GG) previously loosened and replacing the one
previously removed.
Attaching the light kit to
the switch housing
□
Remove the plug (JJ) from the switch housing (G).
□
Carefully feed the light kit (H) wires (black and white)
through the hole in the switch housing (G).
□
Attach the light kit (H) to the switch housing (G) using
the nut (HH) and lock washer (II).
□
Tighten securely to prevent the light kit (H) from
vibrating loose.
Assembly — Installing the Light Kit
HH
II
G
JJ
H
12
NOTE:
Retain the plug (JJ) to reinsert when not using the
light kit (H).
