Installation (continued)
6
5
Installing the light bulbs
Install three 60-watt max. medium- base incandescent bulbs
or three 13-watt max. CFL bulbs (none included)
Remove the pre-installed washers and finial from the pipe
nipple (D). Secure the pipe nipple (D) to the fixture (A) and
place the previously removed metal washer and plastic
washer. Add the glass disc (C) and secure with the previously
removed plastic washer and finial.
8
Securing the canopy to the outlet box
Secure the canopy (F) to the junction box by placing the
holes in the canopy (F) over the support screws (CC).
Secure with the cap nuts (EE) as shown.
D
C
6
Attaching the mounting bracket to
the junction box
Screw the support screws (CC) into the mounting unit (AA).
Attach the mounting unit (AA) to the junction box (not
included) with mounting screws (BB).
NOTE:
The preinstalled support screws on the mounting
unit (AA) should protrude out away from the junction box.
BB
CC
AA
AA
7
Making the electrical connections
Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the preinstalled
ground screw.
Connect the black to black (power), the white to white
(neutral) and copper wire to ground wire with the wire
nuts (DD) and secure with electrical tape (not included).
NOTE:
If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
DD
F
CC
EE
6