HAMPTON BAY CAPRICE SW19151R MWH, Use And Care Manual

Page: 14 / 19

10
11
K
PP
Installing the LED assembly to
the light kit plate
Remove one of the screws (LL) from the light kit plate (J)
and loosen the other two screws (LL), but do not remove.
While holding the light kit plate (K) under your fan, firmly
snap the wire connection
plugs (PP) together.
Place the key holes from the LED assembly (K) over the two
screws (LL) previously loosened from the light kit plate (J).
Turn the LED assembly (K) until it locks at the narrow section
of the key holes. Secure by tightening the two screws (LL)
previously loosened and the one screw (LL) previously
removed.
LL
J
L
J
Installing the glass
Attach the glass ( L ) to the light kit plate ( J ) by twisting
tightly. (DO NOT OVERTIGHTEN)