Assembly
Attaching the leg to the table top
1
Tightening the nuts
2
4
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Place the table top (A) upside down so the pre-drilled corner
holes are visible.
Loosely tighten the nuts with the wrench (DD).
Tighten all the nuts one by one to ensure all legs
are firmly secured to the table top.
IMPORTANT:
attached and initially tightened only a few revolutions.
Then tighten further, one at a time, alternating between
the four legs. Do NOT fully tighten one leg before you
attach the other legs.
Each of the four leg bolts should be
The table is ready for use
3
Align and attach the table legs (B and C) to the corners of table
top (A), using flat washers (AA), spring washers (BB) and hex
nuts (CC).
Your table is ready for use now.
With assistance, carefully turn the table to the upright
position. Adjust the balance of the legs with the leveler
under the legs.
A
B
AA
BB
CC
DD
B
C
C
