background image

Warranty Information 13. 

Hampton Bay Lifetime Limited Warranty

Lifetime Warranty on Motor

Hampton Bay warrants the fan motor to be free from defects in workmanship and material present at 

time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. 

Hampton Bay also warrants that all other fan parts, excluding any glass or acrylic blades, to be free 

from defects in workmanship and material at the time of shipment from the factory for a period of 

one year after the date of purchase by the original purchaser. We agree to correct such defects with-

out charge or at our option replace with a comparable or superior model if the product is returned 

to Hampton Bay. To obtain warranty service, you must present a copy of the receipt as proof of 

purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any 

part such as by accident or misuse or improper installation or by affixing any accessories, is not 

covered by this warranty. Because of varying climatic conditions, this warranty does not cover any 

changes in plated finishes, including rusting, pitting, corroding, tarnishing or peeling. Brass finishes 

of this type give their longest useful life when protected from varying weather conditions. A certain 

amount of “wobble” is normal and should not be considered a defect. Servicing performed by un-

authorized persons shall render the warranty invalid. There is no other express warranty. Hampton 

Bay hereby disclaims any and all warranties, including but not limited to, those of merchantability 

and fitness for a particular purpose to the extent permitted by law. The duration of any implied war-

ranty which cannot be disclaimed is limited to the time period as specified in the express warranty. 

Some states do not allow limitation on how long an implied warranty lasts, so the above limitation 

may not apply to you. Hampton Bay shall not be liable for incidental, consequential, or special 

damages arising out of or in connection with product use or performance except as may otherwise 

be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, 

so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, 

and you may also have other rights which vary form state to state. This warranty supersedes all prior 

warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid 

by the customer.

IMPORTANT NOTE:

To ensure warranty service, if ever

necessary, please register your fan at:

gpwarranty.com

You must present a copy of the original

purchase receipt to obtain warranty service.

G.P. WARRANTY SERVICE CENTER, INC.

WARRANTY SECTION

1951 N.W. 22nd STREET

FORT LAUDERDALE, FLORIDA 33311

Attach receipt here for

easy location.

Summary of Contents for Antigua Plus
















Reviews: